DIY a covered seating area off of your home or cottage using Toja's easy to assemble wall mounted pergola kit.
Toja Tip: Ensure lumber is fully inserted into the bracket cavity, resting on metal tabs for proper installation. We recommend taking down your SHADE SAIL in high winds (50km/30mph) and winter. Do NOT use SHADE SAIL on top of or around a source of heat or flame.
Included
INCLUDED
- 2x TRIO corner brackets
- 4x SOLO base/wall brackets
- 1x SHADE SAIL of chosen size(s) and colour
- 1-1/2” Pan Rob/Phil combo drive 304 S.S Wood screws with Black plastic head caps
NOT INCLUDED
- Wood
Shipping wood is costly. Most of the population has access to stores that sell wood locally where they live. Buying your lumber allows you the freedom to select the type of wood you want to use for your build and budget. There are also regional limitations for what kind of lumber is ideal for your build; different species of lumber would be used in tropical climate vs. a cold one. - Anchoring Hardware
Due to different building materials and requirements based on location, we advise on checking building codes and talking to your local hardware store for the best securing hardware for your specific surface.
Tips
TIPS
GENERAL
WOOD
SCREWS
- Each bracket only requires 2 screws per each side/set of eight holes.
- Insert screws in holes closest to the wood.
- Hardware to secure to wood is included.
- Additional screws are available for purchase
Instructions
SINGLE TOP SHADE WALL MOUNT PERGOLA BUILD
Ladder(s)
Drill(s)
Measuring Tape
Cardboard (to be placed under the brackets to not scratch your surface or the brackets)
When purchasing your lumber, always take a bracket with you to ensure a proper fit.
You can select whatever lumber suits your style and budget. It must be dry and straight.
Brackets use dressed lumber.
4”x4” (3.5”x3.5”) Bracket Cavity is 3.61”x3.61”
6”x6” (5.5”x5.5”) Bracket Cavity is 5.62”x5.62”
Each bracket only requires 2 screws per each side/set of eight holes.
1-1/2” Pan Rob/Phil combo drive 304 S.S Wood screws with Black plastic head caps are included
Insert screws in holes closest to the wood.
Hardware to secure to wood is included.
Additional screws are available for purchase.
SECTION 1 BUILDING THE TOP
BUILDING A ‘U’: Insert your lumber into the TRIO brackets. See figure 1.
Add SOLO brackets. See figure 2.
Secure bracket to lumber with provided screws.
SECTION 2 INSERT THE POSTS
Insert your vertical posts.
Secure bracket to lumber with provided screws.
SECTION 3 MOUNTING TO WALL
Carefully walk your pergola up the wall. Level and anchor your wall mounted SOLO brackets to the wall.
SECTION 4 COMPLETE
Attach corner mounts to TRIOs and side mounts to SOLOs. See figure 3.
Attach buckles. With buckles facing the sky, loop strap around corner mounts, secure with buckle and pull tight. See figure 4.
Line up remaining side mounts to the remaining buckles on SHADE SAIL. See figure 5.
Anchor your ground SOLO brackets to your surface.
Remember Anchoring hardware is NOT included as surfaces will vary from build to build. A local building supply retailer will be a helpful resource.